BeoVox 2400 Passive Loudspeakers
Manufactured: 1967 - 1972
Designer:
Colours: Rosewood, Teak
"B&O loudspeakers will meet very exacting conditions as their specifications exceed international hi-fi standards. All B&O speakers are of the pressure-chamber type with an impedance of 4 ohms. They are available in matched pairs only in a choice of teak or Brazilian rosewood finish" - taken from the 1967 - 1968 Bang & Olufsen product catalogue
__________________________
Would you like to write a review of this product? Do you have any images or Technical Specifications?
If so - please forward them to us so we can add them to our database and share them with fellow Bang & Olufsen enthusiasts around the world. Your name will also appear in the Author Notes section at the bottom of the page!
BeoWorld | Everything Bang & Olufsen
Owner Tip!
To replace the speaker cable:
Take out the bass driver from the front after removing the cloth cover. The crossover unit is behind and is held onto the back with (generally) four screws. Remove these and you should be able to pull the wire through and replace it.
BeoVox 2400 Passive Loudspeakers Product Specifications
Beovox 2400 Specifications
Dimensions W x H x D 60 x 24 x 27,5 cm
Weight 10 kg
Performance
Music load 35 watts
Continuous load 20 watts RMS (DIN 45,573)
Frequency response 40 - 18,000 Hz (DIN 45,570)
Distortion Max. 2,6 % (DIN 45,403)
Sensitivity 2,8 watts (DIN 45,500) Crossover frequency 900/5000 kHz
Capacity 25 litres
Resonance of woofer 35 - 40 Hz
Dispersion 90°
Number of units
Bass unit 1
Mid-range 1
Tweeter 1
Connections: Output Tweeter 4 ohms
Input DIN socket - 4 ohms
Related Products
Created: 10th December 2006
Modified: 9th February 2007
Author Notes:
Photographs are copyright Martin Olsen, published by Beoworld with permission
