BeoVision 10-32 LCD Television
Manufactured: 2010 - present
Designer: David Lewis
Colours: Silver and black
Room for a View
The third set in the ever expanding BeoVision 10 range, this set was designed primarily as a link room set. It shared the thin profile and design of the other sets in the series but lacked the surround sound module of the bigger sets. It was possible to attach both a sub-woofer and two front speakers though these reverted to the system seen many years earlier in the LX and MX sets of utilising a centre balance system.
In common with the BV10-40, an LED edge backlight system was used though the screen itself was a 100Hz device.
Sound was catered for by two way active speakers for each channel though the innovative bass woofer box seen on the 40" and 46" models was no longer present. Interestingly a similar frequency response of 85-20-000Hz was claimed.
A DVB module was an option and the same facilities for switching off the analogue tuner were present on this model as its larger brother.
Connections were comprehensive with 3 HDMI sockets being standard with the third able to be attached to an expander.
Mounting Options
Bang & Olufsen stands available at launch included Motor Table Stand, Motor Floor Stand and a simple Wall Bracket using the hinged device seen previously to position the rear of the TV close to the wall.
BeoVision 10-32 LCD Television Product Specifications
Dimensions
W x H x D
81.4 x 74.2 x 6.4 cm
Weight
27 kg
Dimensions
W x H x D
Including close to wall bracket
81.4 x 74.2 x 6.9 cm
Dimensions
W x H x D
Including side wall bracket
81.4 x 74.2 x 6.8 cm
Dimensions
W x H x D
Including table stand
81.4 x 82.3 x 40.6 cm
Dimensions
W x H x D
Including floor stand
81.4 x 97.5 x 40.6 cm
Chassis type
C3
Cabinet finish
Optional black or white
Frame: Silver
Colour variants front cloth
Blue, black, dark grey, orange, silver, white
Mains voltage range
100-264 V AC
47-63 Hz
Power consumption
On mode 115 W
Standby with system module enabled 0.7 W
Standby with system module disabled 0.5 W
Remote Control (not included)
Beo4, type 1710
Beo5, type 1682
Diagonal picture size
32" 16:9 TFT LCD
Aspect ratio
16:9
Contrast ratio
Typical 5000:1
Pixel Count
2.1 million
Resolution
1920 x 1080 pixels (Full HD)
Display colours
16.7 million
Peak luminance ratio
65%
Luminance of white
Typical 450 cd/m2
Response time
Typical 6 msec.
Contrast screen
Optional
Anti-reflection on both sides
Backlight
Edge-type LED backlight, Global backlight dimming
Refresh rate
100Hz/120Hz
Formats
Format 1: 16:9 Panorama - 15:9
Panorama - 4:3
Format 2: Letterbox + Soft scroll
Format 3: 16:9
Automatic format optimisation via "Black Bar Detection"
16:9 detection on all Scart connectors
Support of WSS (Wide Screen Signalling) from broadcaster
Format 4: The bars can be removed and the picture is shown in a 16:9 format
Viewing comfort
Typical +/-89 degrees both vertically and horizontally
VisionClear
Yes
Menu languages
English, Danish, Dutch, Spanish, Italian, German, French, Swedish
Analogue tuner
Not for US market
Teletext
Teletext level 1.5, 2000 pages
Teletext and picture, 9 memory pages, WSS
Tuning on analogue signals
48-862 MHz
99 programmes, auto-tune, programme move and automatic naming
TV system on analogue signals
According to type and setup
B/G/L/L’/D/K, PAL and SECAM
Frequency range
45-860 MHz VHF, S-band, Hyper-band, UHF 99 programmes, auto tune, programme move and automatic naming
Stereo decoding capabilities on analogue signals
A2 + Nicam
Digital tuner DVB-T/C
Optional
Not for US market
Video format
Mpeg2 (MP@ML, MP@HL), H264 (Mpeg4)
Audio format
Mpeg1, Mpeg2, AAC, AAC+ and AC3 decoding and downmix
Frequency, range and IF bandwidth
110-862 MHz (Band 3, 4, 5) IF bandwidth 6, 7 & 8 MHz selectable
Auto tuning 174-230 MHz and 470-858 MHz
Common interface and smart card slots
Common Interface according to EN50221
1x PCMCIA (Common Interface only)
Embedded CA: Conax (without Chip and Card pairing),
1 Smart card slot connector
All CA systems available as common interface are supported
CA power supply: 5 V/500 mA max.
Digital tuner DVB-T/C/S2
Optional
Not for US market
Video format
Mpeg2 (MP@ML, MP@HL), H264 (Mpeg4)
Audio format
Mpeg1, Mpeg2, AAC, AAC+ and AC3 decoding and downmix
Frequency, range and IF bandwidth
S/S2: 10700-12750 MHz, IF Bandwidth 950-2150 MHz
T/C: 110-862 MHz (Band 3, 4, 5) IF Bandwidth 6, 7 & 8 MHz selectable
Auto tuning 174-230MHz and 470-858MHz
Raster
Special requirements for France, Italy, Taiwan and Australia
Cofdm (coded orthogonal freq. division modulation) spectrum
2K & 8K, hierarchical and non-hierarchical
Modulation
Terrestrial : QPSK, 16QAM, 64QAM
Satellite : QPSK
Satellite S2 : 8PSK, QPSK
Code rate
1/2, 2/3, 3/4, 5/6, 7/8
Guard interval
1/32, 1/16, 1/8, ¼
Symbol rate
2-45 Msymb/sec
Odu control
DiSEqC 1.1
Common interface and smart card slots
Common Interface according to EN50221
1x PCMCIA (Common Interface only)
Embedded CA: Conax (without Chip and Card pairing),
1 SmartCard slot connector
All CA systems available as common interface are supported
CA power supply: 5V /500 mA max.
Loudspeakers:
Types
Integrated stereo speakers
Power amplifier modules
20 W
Frequency range
85-20,000 Hz
Cabinet principle/ net volume
Closed box 0.5l
Woofer
None
Midrange
58 mm
Tweeter
19 mm
Bass equalizer
Adaptive Bass Linearization (ABL)
Magnetic shielded
None
System modulator:
Not for US market
Video distribution
BeoLink video distribution (system modulator output to link room) via RF
Frequency range
According to setup: G or I or M RF output
- Video frequency range: 471.71-855.25 MHz (in 1 MHz steps) dual side band
- Audio frequency range:
- System G: 5.5 MHz (system can be set in Service Menu)
- System I: 6 MHz (system can be set in Service Menu)
- System M: 4.5 MHz (system can be set in Service Menu)
Audio
Stereo audio distribution via Master Link
Peripheral Unit/Set-top Box Controller:
Controlling boxes with Beo4
Maximum control of 4 boxes
HDMI Inputs
3 X HDMI
Formats
480p,576p, 600p, 768p, 576i, 480i, 720p, 1080p,1080i
Created: 30th October 2010
Modified: 19th February 2019
Author Notes:
